SEVP CCB Brake Kit for 2021+ Model S LR/Plaid

SEVP Carbon Ceramic Rotor by StopArt

OEM Direct Replacement | Engineered for Performance

Upgrade your braking system with SEVP carbon ceramic rotors, designed as a direct OEM replacement while delivering substantial weight reduction, improved thermal performance, and long-term durability.

FOR OEM TRACK PACK 410/410 KIT, PLEASE VISIT: SEVP TRACK PACK ROTOR KIT

Specifications

Front: F380 × 32mm
Weight: 15.7 lb each
OEM: 27.83 lb each

Rear: R365 × 28mm
Weight: 12.2 lb each
OEM: 22.5 lb each

Rotor Ring Material:

T-700 Long-Fiber / Advanced Silicone Carbide Coating

Key Features & Advantages

• • Direct OEM Fitment — Designed to work with OEM calipers with no modification required
  • Significant Unsprung Weight Reduction — Reduces rotational and unsprung mass for improved handling and ride quality
  • Ultra-Lightweight Construction — Performance-focused design without unnecessary weight
  • Premium Two-Piece Rotor Design — Combines performance, durability, and serviceability
  • Anodized 7075-T7 Aluminum Hat — High-strength construction with excellent corrosion resistance
  • Precision Smaller Vent Holes — Maintains greater material between openings for enhanced structural support and durability
  • Unique Rotor ID Code — Each rotor is individually identified for product traceability and verification
  • Limited Lifetime Warranty* — Built with confidence and backed by long-term coverage

Tested and Proven:

CCB Testing condition: 

700C (1296F) 2000 cylces (Pad change in between, on same rotor)

900C (1652F) 75 cycles (No Pad change)

(Test Pad used Pagid RSC2)

Bedding (Break-In) Procedure

⚠️ Perform only where safe and legal. Sudden braking can be hazardous.

Step 1: Gentle Stops

20 stops from 30 mph (50 km/h) to a complete stop using light pedal pressure.

Step 2: Medium Stops

20 stops from 75 mph (120 km/h) down to 25 mph (40 km/h)
Apply approximately 0.4–0.5 g braking force.

Step 3: Heavy Stops

10 stops from 70~100 mph (112~160 km/h) down to 25 mph (40 km/h)
Apply approximately 0.7 g braking force
Target ~4 stops per minute

Step 4: Controlled Cool Down

Drive at ~50 mph (80 km/h) without braking for 15 minutes
Allow brake temperature to drop below 100°C

Important Disclaimers

• Professional installation recommended. Improper installation may result in reduced performance or component damage.
• Brake pads compatibility is critical. Carbon ceramic rotors must be paired with appropriate pad compounds. Use of incorrect pads may cause excessive wear, noise, or damage. 
• Track use disclaimer: While designed for high-performance applications, extreme track use without proper cooling, pad selection, and maintenance may accelerate wear.
• Surface appearance: Due to the nature of carbon ceramic composite materials, minor surface variations or cosmetic marks are normal and do not affect performance.
• Noise & behavior: Occasional noise (squeal) or different pedal feel compared to iron rotors is normal. 
• Warranty disclaimer*: Limited Lifetime Warranty covers manufacturing defects only. It does not cover wear items, improper installation, misuse, track abuse, or damage caused by incompatible components.
• No liability: User assumes all responsibility for installation and use. SEVP is not liable for damages resulting from improper use, installation, or application.

Final Note

Proper installation, pad selection, and bedding are essential to ensure optimal performance, longevity, and safety of your braking system.