SEVP / Track Pack Full Kit

ETA: September 25th 2026. 

SEVP / Track Pack Full Kit 

Kit Includes:

• 2 × SEVP 410 × 40 mm carbon-silicon carbide front rotors
• 2 × SEVP 410 × 32 mm carbon-silicon carbide rear rotors
• 1 × OEM Tesla Track Pack 6-piston front-left caliper (Signature Gold or Red )*
• 1 × OEM Tesla Track Pack 6-piston front-right caliper (Signature Gold or Red )*
• 1 × OEM Tesla Track Pack 4-piston rear-left caliper (Signature Gold or Red )*
• 1 × OEM Tesla Track Pack 4-piston rear-right caliper (Signature Gold or Red)*
• 1 × OEM Tesla Track Pack front brake pad set*
• 1 × OEM Tesla Track Pack rear brake pad set*
• 1 × OEM Tesla Track Pack front left brake hoses*
• 1 × OEM Tesla Track Pack front right brake hoses*
• 1 × OEM Tesla Track Pack rear left brake hoses*
• 1 × OEM Tesla Track Pack rear right brake hoses*
• 1 × OEM Tesla Track Pack rear left harnesses*
• 1 × OEM Tesla Track Pack rear right harnesses*
• 1 × OEM Tesla dust shields front left*
• 1 × OEM Tesla dust shields front right*
• 1 × OEM Tesla dust shields rear left*
• 1 × OEM Tesla dust shields rear right*
• 4 × OEM Tesla front caliper bolts*
• 4 × OEM Tesla rear caliper bolts*
• 12 × OEM Tesla dust shield bolts*
• 2 × OEM Tesla rotor retainer bolts*

Includes Track Pack Firmware unlock 

*Genuine Part direct source from Tesla

Direct Bolt-On

Rotor Tested and Proven:

CCB Testing condition: 

700C (1296F) 2000 cylces (Pad change in between, on same rotor)

900C (1652F) 75 cycles (No Pad change)

(Pad used Pagid RSC2)

Silicon Carbide Conversion

Molten silicon is infused into the carbon structure, forming silicon carbide (SiC), the ceramic material responsible for the rotor’s hardness and heat resistance.

Bedding (Break-In) Procedure

⚠️ Perform only where safe and legal. Sudden braking can be hazardous.

Step 1: Gentle Stops

20 stops from 30 mph (50 km/h) to a complete stop using light pedal pressure.

Step 2: Medium Stops

20 stops from 75 mph (120 km/h) down to 25 mph (40 km/h)
Apply approximately 0.4–0.5 g braking force.

Step 3: Heavy Stops

10 stops from 100 mph (160 km/h) down to 25 mph (40 km/h)
Apply approximately 0.7 g braking force
Target ~4 stops per minute

Step 4: Controlled Cool Down

Drive at ~50 mph (80 km/h) without braking for 15 minutes
Allow brake temperature to drop below 100°C

Important Disclaimers

• Professional installation recommended. Improper installation may result in reduced performance or component damage.
• Brake pads compatibility is critical. Carbon ceramic rotors must be paired with appropriate pad compounds. Use of incorrect pads may cause excessive wear, noise, or damage. 
• Track use disclaimer: While designed for high-performance applications, extreme track use without proper cooling, pad selection, and maintenance may accelerate wear.
• Surface appearance: Due to the nature of carbon ceramic composite materials, minor surface variations or cosmetic marks are normal and do not affect performance.
• Noise & behavior: Occasional noise (squeal) or different pedal feel compared to iron rotors is normal. 
• Warranty disclaimer*: Limited Lifetime Warranty covers manufacturing defects only. It does not cover wear items, improper installation, misuse, track abuse, or damage caused by incompatible components.
• No liability: User assumes all responsibility for installation and use. SEVP is not liable for damages resulting from improper use, installation, or application.

Final Note

Proper installation, pad selection, and bedding are essential to ensure optimal performance, longevity, and safety of your braking system.